Philips BlueTouch PR3092/04 Mode D'emploi page 15

4 Insert the micro USB plug into the socket on the BlueTouch Pain
Relief Patch.
When the BlueTouch Pain Relief Patch is connected to the mains,
,
it beeps once to indicate that charging has started.
, The charging light on the connection panel flashes green slowly
and regularly while the BlueTouch Pain Relief Patch is charging.
5 When the BlueTouch Pain Relief Patch is fully charged, the charging
light turns solid green.
6 Remove the adapter from the wall socket and pull the USB plug out
of the micro USB socket on the BlueTouch Pain Relief Patch.
Charging using the micro USB socket
You can also charge the BlueTouch Pain Relief Patch by plugging the USB
plug into a USB port on your computer. Charging with the USB cable
connected to the computer can take up to 8 hours.
1 Insert the micro USB plug into the USB socket on the BlueTouch
Pain Relief Patch.
2 Insert the standard USB plug into a USB port on your computer.
When the micro USB cable is connected properly, the BlueTouch
,
Pain Relief Patch beeps once and the charging light starts flashing
green slowly.
3 Remove the micro USB cable from the micro USB socket on the
BlueTouch Pain Relief Patch when the charging light turns solid green
to show that charging is completed.
ENGLISH
15