Sirius Features; Selecting Sirius Source; Selecting The Preset Band; Tuning - Kenwood Ez900HDS Mode D'emploi

SIRIUS features

AUTO
Band display

Selecting SIRIUS source

Selecting SIRIUS source
Press the [SRC] button.
Select the "SIRIUS" display.
• You need to subscribe to SIRIUS receive the service by
SIRIUS Satellite Radio. Consult SIRIUS if "CALL 888-539
SIRIUS TO SUBSCRIBE" appears. Refer to <Activating
your SIRIUS subscription> (page6).
• It may take a little time to start receiving after you
selected the SIRIUS source.
• If you cannot receive any signal in the input Channel
due to a bad condition on radio wave or another
problem, "Acquiring Signal" appears.

Selecting the Preset Band

Press the [FM] button.
Each time the button is pressed the preset band
switches between the SR1, SR2, SR3 and SR4.
20
|
English
SRC
OPEN
ST ST TI TI
ATT ATT DIGITAL ANALOG RDS PTY DIGITAL ANALOG RDS PTY
AUDIO/ 4/ ¢
FM
1 - 6
Preset channel number
MP3 WMA
DAB NEWS DAB NEWS MP3 WMA
Channel display

Tuning

Selecting the channel.
Turn the [4] / [¢] knob.

Channel Preset Memory

Putting the channels in the memory.
1
Select the band
Press the [FM] button.
2
Select the channel to put in the memory
Turn the [4] / [¢] knob.
3
Put the channel in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the
memory on each [1] — [6] button.
SCROLL
c.s.
38
M P S M P S