CDVI SASIC Mode D'emploi page 39

EN
General alarm warning
1
light
Warning light and Open
2
doors 1 & 2 Push Button
Master warning light
3
"M"
Button "M/S"
4
Master / Slave
5 Slave warning light "S"
Warning light and
6 Manual
door 1 PB
Warning light and Auto
7
door 1 PB
Alarm warning
8
light door 1
Call warning light on
9
door 1
Warning light and PB
10
lock door 1
Warning light and Open
11
door 1 PB
Warning light and
12 manual
door 2 PB
Warning light and Auto
13
door 2 PB
Alarm warning light
14
door 2
Call warning light on
15
door 2
Warning light and Open
16
door 2 PB
Warning light and Lock
17
door 2 Push Button
*See functioning on chapter 7.1.3
Description of warning lights and commands
Problem detected on the SAS central unit, see alarm scenarios to identify
the reason for the problem.
Requests the opening of the two doors simultaneously for 10 seconds.
If one of the doors is already open or locked, the request to open is cancelled.
If this warning light is lit up and steady, the Control panel is master.
For requests to take over as master or to pass control back and return to slave
status.
If this warning light is lit up and steady, the Control panel is slave.
Transfers the door 1 to manual mode*
Transfers the door 1 to automatic mode*
Door 1 has not closed after timed opening period has expired.
Door 1 is in manual or locked mode and somebody is requesting entrance
at this door using the traffic light indicator.
Door 1 can no longer be opened using the push button, the traffic light indicator
or the open commands on the control panels. But it can be opened by an external
reader or by a remote transmitter.
The control panels command the timed door opening on door 1.
Transfers door 2 to manual mode*
Transfers door 2 to automatic mode*
Door 2 has not closed after timed opening period has expired.
Door 2 is in manual or locked mode and somebody is requesting entrance
at this door using the traffic light indicator.
The control panels command the timed door opening on door 2.
Door 2 can no longer be opened using the push button, the traffic light indicator
or the open commands on the control panels. But it can be opened by an external
reader or by a remote transmitter.
SASIC
2-door Control Unit
39