Recommended Tools For Installation - CIARRA CBCB4850-OW Manuel De L'utilisateur Et D'installation

Recommended Tools for Installation

•
Measuring tape
•
Phillips screwdriver no. 2
•
Flat blade screwdriver (to open knockout holes)
• Drill, 1/8" drill bit and 1½" hole saw (to mark holes for ducting and cut
electrical access hole)
•
Wood shims (2) and wood screws (4) (required for standard installation to
framed cabinet)
•
Saw (to cut holes for ducted application)
•
Sheet metal shears (ducted installation only, for duct adjustment)
•
Pliers (ducted installation only, for duct adjustment)
•
Metal foil duct tape (for ducted applications)
•
Scissors (to cut metal foil duct tape)
•
Pencil
•
Wire stripper
• Strain relief, 1/2" diameter (to secure house wiring cable to the hood)
CAUTION: Before proceeding to the installation, check the contents of
the box. If items are missing or damaged, contact the manufacturer.
Observe all governing codes and ordinances. Have a qualified
technician install the range hood. It is the installer's responsibility to
comply with installation clearances specified on the model/serial rating
plate. The manufacturer declines all responsibility for improper
installation and does not accept responsibility for appliance warranty in
the event of damage caused by incorrect installation.
Installation
7
EN