Painted Finish Cleaning; Led Replacement - CIARRA CBCB4850-OW Manuel De L'utilisateur Et D'installation

Cleaning and Maintenance
Don't:
⚫ Use any steel or stainless steel wool or any other scrapers to remove
stubborn dirt.
⚫ Use any harsh or abrasive cleansers.
⚫ Allow dirt to accumulate.
⚫ Let plaster dust or any other construction residues reach the hood. During
construction/ renovation, cover the range hood to make sure no dust sticks
to the stainless steel surface.
Avoid when choosing a detergent:
⚫ Any cleaners that contain bleach will attack stainless steel.
⚫ Any products containing: chloride, fluoride, iodide, bromide will
deteriorate surfaces rapidly.
⚫ Any combustible products used for cleaning such as acetone, alcohol,
ether, benzol, etc., are highly explosive and should never be used close to
a range.

PAINTED FINISH CLEANING:

EN
Clean with warm water and mild detergent only. If discoloration occurs, use a
finish polish such as automotive polish. (DO NOT use rough abrasive cleaner
or porcelain cleaner.)

LED REPLACEMENT

◼ Circular/ Rectangle LED lamp:
18