CIARRA CBCB4850-OW Manuel De L'utilisateur Et D'installation page 12

Installation
NOTE: The cables only can be adjusted when the cable holder tips are
pressed.
6) Connect the power cord of the hood.
If there is a power connector on the ceiling, you need to pass the power
cord through the decorative plate, and connect the power cable to the
power connector on the ceiling.
If there is no power connector on the ceiling, connect the power cable to
the power connector without going through the decorative plate.
EN
Qualified electricians are required to install the power cord. Please
pay attention to personal safety to prevent electric shock
7) Push the decorative plate up so that it is attached to the magnets of the
hanging plate.
Attention:
10