Replacement Parts - Rheem Raypak Crosswind-30-I Manuel D'installation

On/Off Models Only
Parameter
Performance Condition: Air 80°F (27°C)/ Water 80°F (27°C)/ Humidity 80%
Heating capacity (BTU)
C.O.P
Performance Condition: Air 80°F (27°C)/ Water 80°F (27°C)/ Humidity 63%
Heating capacity (BTU)
C.O.P
Performance Condition: Air 50°F (10°C)/ Water 80°F (27°C)/ Humidity 63%
Heating capacity (BTU)
C.O.P
Rated input power (kW) at air 80°F (27°C)
Rated input current (A) at air 80°F (27°C)
Power supply
Minimum circuit ampacity (A)
Water flow GPM (L/min)
Sound pressure 3m dB(A)
Heat exchanger
Casing
Air discharge
Water pipe in-out Spec
Net Dimension
Net Weight
Related parameters are subject to adjustment periodically for technical improvement without further notice. For details please refer to
nameplate.

10. REPLACEMENT PARTS

NOTE: To supply you with the correct part, it is important
that you supply the heater model number, serial number
and type of gas when applicable.
Any part returned for replacement under standard
company warranties must be properly tagged with a
return parts tag, completely filled in with the heater serial
number, model number, etc., and shipped to the Company
freight prepaid. If determined defective by the Company
and within warranty, a like part or equal substitution will be
returned, freight collect. Credit will not be issued.
28
APPROVED
Table K. Technical Parameters - On/Off Models Only
UNCONTROLLED DOCUMENT IF PRINTED
Crosswind On/Off Models
40-O
35,900 46,500
5.21
34,100 44,100
5.03
20,500 26,000
3.31
1.65
7.7
208-230V/1Ph/60Hz
12
17.7~26.4 21.9~30.6
(67~100) (83~116)
41.50
Titanium in PVC
ABS casing
Horizontal
1-1/2" PVC (50 mm)
See Table C on page 10.
MANUFACTURER:
Raypak, Inc.
2151 Eastman Avenue
Oxnard, CA 93030
1-800-260-2758
50-O 65-O
55,100
5.40 5.71
51,800
5.07 5.29
33,800
3.17 3.45
2.3 2.6
10.8 11.8
16 17.2
28.5~37.5
(108~142)
41.70 42.40