Grandstream GXP2130 Guide D'installation Rapide page 4

PHONE SETUP:
PC LAN DC 12 HEADSET
Installing the Phone (Wall Mount):
1. Attach the wall mount to the slot on the back of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab from the handset cradle (See figure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the
handset while the phone is mounted on the wall (See figure below).
Installing the Phone (Phone Stand):
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom of the phone where there is a slot for the phone stand (upper part,
bottom part).
Installing BLF Paper Label:
1. Install the paper label under the plastic notches on the phone and gently lay the
paper down on the phone surface.
2. Install the plastic cover over the paper label by inserting the cover under the
plastic notches on the phone.
3
Slots for the
wall mount and
phone stand
HANDSET
Handset rest
Tab with extension up
Tab with extension down
CONNECTING THE PHONE:
PC LAN DC 12
PC Port LAN Port Power Headset Port Handset Port
Cover
Label
HEADSET HANDSET
4