Assembling - Philips Premium collection HR2355/09 Mode D'emploi

Assembling

• Make sure to tighten the front panel knobs during assembly.
• Make sure the appliance is not plugged in when assembling the
appliance.
1
Push the mixing chamber into the
appliance.
2
Point the mixing paddle to the hole in
the main unit. Insert the mixing paddle
all the way into the main unit.
3
Attach the disc holder onto the
appliance.
❶ Disc holder safety switch
❷ Disc holder safety switch lever
Note:
• Check that the safety switch ❶ and
safety switch lever ❷ are set as shown
in the illustration to the right.
12 English
Follow below assembling steps to
install the Pasta maker.
Important
1
2