Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
Prepare for installation:
a) If you have an outlet to the outside, your cooker hood can be connected as
below picture by means of an extraction duct (enamel, aluminum, flexible
pipe or inflammable material with an interior diameter of 150mm).
Choose a straight, short duct run to allow the hood to perform most
efficiently. Long duct runs, elbows and transitions will reduce the
performance of the hood. Use as few of them as possible. When possible,
use at least 2 foots straight runs before any turns. Larger ductwork may be
required for best performance with longer duct runs.
b) Before installation, turn the unit off and unplug it from the outlet.
EN
c) The cooker hood should be placed at a distance of 65~75cm above the
cooking plane for best effect.
6
Publicité
Chapitres
Table des Matières
Dépannage
