Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
11) Then pulling out the upper chimney upwards to the target height. Adjust to
reach the height required.
12) Fix the upper chimney on the upper chimney bracket by 2 screws (4x8mm).
Then fix the upper chimney bracket on the wall. Before fixing the bracket
on the wall, you can decide the upper chimney bracket fixing holes for
installation.
EN
13) Fix the lower chimney with 2 pcs of ST4x8mm screws on the cooker hood.
NOTE:
➢ Connect ductwork to hood and use metal foil duct tape to make joints
secure and air-tight.
➢ Make sure the damper assembly (or round duct plate) enters the ductwork
and that the damper opens and closes freely.
12
Publicité
Chapitres
Table des Matières
Dépannage
