CIARRA 736N Manuel De L'utilisateur Et D'installation page 12

Installation
6) Drill two 8mm holes in the marked position on the wall with an electric drill,
and then put the wall plug in.
7) Hang the cooker hood on the wall bracket again. After that, use two 4 *
30mm screws to lock the corresponding positioning in the figure.
EN
8) The lower chimney bracket is used to fix the upper decorative chimney and
lower decorative chimney.
Use 2pcs ST4x8mm screws to attach lower and upper chimney together.
Before attaching the bracket to the chimney, decide the location of lower
chimney bracket fixing holes for fixing the lower chimney bracket in the
later step.
Do not fasten screws too much, make sure upper decorative chimney can
be telescopically adjusted after assembled.
10