Battery Indicator - Scrambler Ducati SCR-E SPORT Mode D'emploi

8.6 Data resetting
Press the right button for at least 1 second to reset the avg speed/max speed/trip/time values
8.7 Lighting management
The sensor on the display allows you to automatically switch the front light on/off.
To manually switch the front light on/off, first, deactivate the "automatic light sensor mode"
parameter in the display configuration, then press and hold the up button for at least 1 second to
switch the front light on the pedal-assist bicycle on/off.
Check that the reflectors are present and well tightened in the front and rear wheel.
8.8 Assisted walking
Press and hold the down button for at least 1 second to activate the assisted walking function;
the same function is interrupted when the down button is released.
The assisted walking function allows the bike to activate the motor without the need to pedal; this
function allows the bike to reach a maximum speed of 6 km/h.
ATTENTION
Assisted walking
Never use the assisted walking function while riding, as the electric parts of the bike could be
damaged.
Always use the assisted walking function while walking alongside your electric bike, holding the
handlebar grips firmly with both hands.

8.9 Battery indicator

The battery indicator is full when the battery of your pedal-assist bicycle is fully charged. The
battery indicator drops in level as the pedal-assist bicycle is used. The battery indicator may
fluctuate in the charge level depending on the use of the pedal-assist bicycle, for example, if
you are on a gradient, the battery indicator level may drop rapidly as you consume much more
of the battery power of your pedal-assist bicycle.
For optimal use and maintenance of the battery, we recommend that you fully
charge the battery after each use of your electric bike.
20