Checking The Parts - Scrambler Ducati SCR-E SPORT Mode D'emploi

7.3 Checking the parts

The supporting frame of the pedal-assist bicycle and the welds must be free of visible defects
such as: cracks, deformations, incisions, corrosion, etc.
Make sure that all the bolts and pedals of the pedal-assist bicycle are properly tightened.
Check the condition and attachment of the battery, the electrical cable sleeves must be in
good condition, and the terminals must be well tightened and not corroded.
Check the battery charge status using the indicator on the handlebar display.
For proper use of the battery in your EPAC vehicle, we recommend that you always
charge the battery after each use of the bicycle.
Using the inflation valve on the rims, check the inflation pressure of the tyres using a
compressor and a pressure gauge gun or a workshop pump.
Check the condition of the tread, the rim and the attachment of the rims to the hubs. If
you need to replace the tyres, contact the Support Service or a qualified tyre dealer.
Do not modify the tensioning of the spokes: the adjustment must be carried out by
specialised personnel and with suitable equipment.
The brakes must be adjusted in such a way as to ensure effective braking, and at the
same time the control levers must have a range sufficient for modulating braking: in other
words, the brakes must be neither too loose nor too tight.
17