Machine Operation; Thermal Protector; Machine Maintenance - Tennant V-BP-6B Manuel D'utilisation

MACHINE OPERATION

1. Press the on/off switch to the on position.
2. Keep back straight while cleaning to prevent back
fatigue.
3. Operate the two-bend wand with a forward and
backward motion. For models equipped with the
straight wand and Sidewinder tool, hold the wand
parallel to your body and pivot your waist while
walking (a side to side mopping motion). This
motion keeps the upper body and arms from tiring.
Tennant V-BP-6B, (01-2018)

THERMAL PROTECTOR

The backpack vacuum has been fitted with an auto-
reset thermal overload switch to protect the motor
against damage should the airflow be blocked for
extended periods. This may occur if the vacuum
bag is overfull, the cloth filter bag is clogged, or if
the vacuum hose, filter, or exhaust is blocked. The
vacuum motor will stop before it can get too hot.
If this happens, turn off the machine, empty and
thoroughly clean the vacuum bag and filters, or free
any blockage and ensure that adequate airflow is
restored. After the motor cools, you will be able to
restart the machine – this may take up to 20 minutes.

MACHINE MAINTENANCE

To keep machine in good working condition, simply
perform the following maintenance procedures.
1. Check vacuum bag for level of fullness. Replace
when two thirds full.
English
EN
11