SCHOTT VisiLED Serie Conseils D'utilisation page 67

Properties
RS232 connection cable
or RS232-to-USB1.1
converter (13)
Connection for flash cable
and trigger mode (14)
Connection for foot
switch (15)
Voltage input (16)
Properties
LED operating hours
(until drop-off to 50 %
brightness)
Lamp change in VisiLED
illuminations
Color temperature
Heat protection measure
Values
Sub-D, 9 pin, "female"
Pin 2 = Data out from MC 1500
Pin 3 = Data into MC 1500
Pin 5 = Ground
3.5 mm mono jack socket
tip positive tied to + 5 V with 10 kΩ resistor
TTL, CMOS, Volt free contact or NPN open
collector compatible, triggered by a falling
edge (contact closure)
3.5 mm mono jack socket
tip positive tied to + 5 V with 10 kΩ resistor
TTL, CMOS, Volt free contact or NPN open
collector compatible, triggered by a falling
edge (contact closure)
2.1 mm power socket
tip positive, 21 V +/- 0.5 V DC
Max. current drain 1,92 A continuous
Values
approx. 30 000 hrs
All LEDs in the ringlights must be exchanged
in one go. The replacement must be carried out
by the manufacturer or an authorized customer
service depot.
approx. 5600 K
Convection cooling
Integrated thermo guard
MC 1500 Connections
General properties of VisiLED
illumination units
VisiLED-Serie | 65
GB