Operating Controls - SCHOTT VisiLED Serie Conseils D'utilisation

Operating controls

Several special functions like e.g.
flash mode can only be adjusted via
the PC
Subject to modifications and amend-
ments
40 | VisiLED-Serie
2
1
8
A/B unit selector key with LED display
1
Only illumination parameters of the VisiLED unit
(A or B) selected using (1) can be set by the key-
board of the MC 1500! The LED indicators of the
MC 1500 display the settings of the selected unit
only. The illumination is not affected by solely
pressing the selector key.
LED display for segment setting
2
Shows the current segment mode of the selected
illumination unit A/B.
Select key for segment setting
3
Setting of segment mode for selected unit A/B.
LED display for light intensity adjustment
4
Shows the relative brightness of the selected
unit A/B.
Keys for brightness adjustment
5
Keys for increasing/reducing the brightness of the
selected unit A/B. When operating in activated
strobe or trigger mode the keys (5) have special
functions (see Section 8.6).
Key for single step and continuous rotation
6
Single step rotation of the selected unit A/B by
pressing key (6). "On/off" continuous rotation of
selected unit A/B by holding down key (6) for
more than 2 seconds. "On/off" synchronized rota-
tion of illumination units A and B by pressing or
holding down key combination (10) + (6). Under
synchro nized rotation the set mixed light charac-
teristics is retained.
3 4 5 6
9 5 10
Memory area
7
Memory keys M1 to M4 for calling up stored
illumination conditions. Key combination
(M) + (M1) to (M) + (M4) for saving the
currently set mixed light.
Thermo guard
8
Red, blinking LED (8) warns of increased
tempera ture of the illumination unit A or B.
When the maximum permitted temperature
is exceeded affected VisiLED unit is switched
off and display (8) is permanently lit up.
"Strobe" key
9
Activation/deactivation of strobe mode for
the selected illumination unit A/B. Special
functions when strobe mode activated: Key
(5): Setting of strobe frequency; Key combi-
nation (10) + (5):
Setting of strobe pulse duration.
"Star" key
10
Only functions when pressed in combination
with other keys.
"Trigger mode" key combination
9 10
Activation/deactivation of trigger mode for
the selected LED unit. Special functions when
trigger mode activated: Key (5): Setting of
duration between external trigger pulse and
light pulse.
7