Basic Configuration Of Dome Camera System - Eneo HDD-2030PTZ1080 Mode D'emploi

NOTICE: It is recommended to remove camera window for improving picture quality
i
when you use bubble ring ass'y.
The dome camera is for use in surface mounting applications and the mounting surface
should be capable of supporting loads up to 4.5kg.
The dome camera's base should be attached to a structural object, such as hard wood,
wall stud or ceiling rafter that supports the weight of the dome camera.
Lock
Figure 3 – Installation

Basic Configuration of Dome Camera System

BNC Cable (Yellow Connector)
RS-485 RX+
White
RS-485 RX-
Brown
GND
Black 3P
16
Unlock
Lock
Alarm Input 1
Red
Alarm Input 2
Orange
Alarm Input 3
Yellow
Alarm Input 4
Green
Alarm Output 1
Blue
Alarm Output 2
Violet
Surface (ceiling)
Plate Adaptor
Dome Camera