Step 4: Door Removal & Adjustment - Thermador PROFESSIONAL PRO GRAND PRD364JDGC Manuel D'installation

Step 4: Door Removal and
Adjustment
• USE CAUTION WHEN REMOVING THE DOOR.
THE DOOR IS VERY HEAVY. Failure to grasp the
oven door firmly and properly could result in
personal injury and product damage.
• Make sure oven is cool and power to the oven has
been turned off before removing the door. Failure to
do so could result in electrical shock or burns.
• With the door off, never release the levers and try to
close the hinges. Without the weight of the door, the
powerful springs will snap the hinges closed with
great force.
To Remove the Oven Door:
CAUTION:
Figure 9: Door Removal
To Reinstall the Oven Door:
To Check Door Fit and Adjustment:
1. Open and close the door slowly to test the movement
and the fit of the door to the oven cavity. Do not force
the door to open or close. If the door is properly
installed, it should move smoothly and rest straight on
the front of the range when closed.
2. The range must be level for proper alignment of the
oven doors, see "Step 9: Placing and Leveling the
Range".
3. If the door does not operate correctly, verify that the
hinges are properly seated into the hinge slots, and
that the hinge clips are fully engaged into the slots.
Figure 10: Door Install
English 11