Philips VisaPureMen Mode D'emploi page 17

Problem
The appliance does not
charge.
The appliance does not
work anymore.
Solution
Make sure the socket to which you connect the appliance is live. Check
whether the voltage indicated on the appliance corresponds to the local
mains voltage. Check whether the charging pins on the appliance are in
proper contact with the contact points in the stand. If you use a socket in a
bathroom cabinet, you may need to switch on the light to activate the socket.
When the light on the appliance still does not light up or when the appliance
still does not charge, take it to your Philips dealer or the nearest Philips
service center.
Make sure that you have pressed the on/off button properly. Charge the
appliance according to the instructions in this user manual. Verify whether
there is a power failure and if the wall socket is live. Check if the charging light
on the appliance lights up to make sure the appliance is charging. If it does
not light up or if the appliance still does not work, take it to your Philips
dealer or the nearest Philips service center.
17