Rexel Auto+ 100 Manuel D'utilisation page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Lights and Icons Explained
Colour of symbol
Power on/off switch
Auto Mode
Continuous Jam Boost Mode
Reverse Mode
Paper Jam
Loading Door open
Bin full or open
Motor Cool Down Required
Self cleaning of cutters
Sleep Mode
Auto+ 100 Shredding Capability
Auto+ 100 CAN shred
the following:
Auto+ 100 CANNOT
shred the following:
Auto
Paper Jams
Blue
Red
Off
Light
Light
Light
Light
Light
Light
Light
Light
Light
Light
Flashing
Off
Stapled paper
Paper clip paper
25mm within the corner
25mm within the corner
26/6 and 24/6 or smaller staples
Capable of shredding small/
medium (max wire thickness =
0.9 mm) paper clips
A5 paper loaded inline with
guidelines
100 sheets plain paper
100 sheets colour printing
>80/100gsm paper (through low
sheet count entry slot)
Heavy Duty Staples. Check the
A document with more than
staple leg length is not greater
25 sheets held together by a
than 6mm.
staple or clip.
Large clips. Check the length
Multiple folded sheets (folded
of the paperclip is not longer
A3 sheets likely to be more
than 32mm.
common).
Plastic sheets, laminated
Thick paper or card
documents, plastic folders, glossy
paper or a sheet covered with print
on both sides.
Bin full /
Cool down
bin open /
loading door open
Red
Red
Light
Light
Flashing
A3 folded in half
max. 2 sheets
100 sheets single sided printed
paper
80 gsm paper
- A4 - 210mm x 297mm
- A5 - 148mm x 210mm
- A3 single sheet folded in half
to make A4
Bound documents
Magazines or other documents
bound by multiple staples
or clips
Adhesive labels
G
Although the Auto+
100 will accept
fastened sheets, Rexel
recommend that
staples and paper clips
are removed prior to
shredding to extend the
life of the product.
Bulldog clips
Unopened mail e.g. junk mail
5

Publicité

Table des Matières
loading

Table des Matières