Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ALWAYS turn the rangefinder "OFF" when not in
use. Leaving the rangefinder "ON" increases the
risk of someone inadvertently staring into the
laser beam.
DO NOT operate the rangefinder in combustible
areas such as in the presence of flammable
liquids, gases or dust.
ALWAYS position the rangefinder securely. Damage
to the rangefinder and/or serious injury to the user
could result if the rangefinder falls.
ALWAYS use only the accessories that are
recommended by the manufacturer of your
rangefinder. Use of accessories that have been
designed for use with other rangefinders could result
in serious injury.
DO NOT leave rangefinder "on" unattended in any
WARNING: Batteries can explode or leak, and
can cause injury or fire. To reduce this risk:
ALWAYS follow all instructions and warnings on
the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of
them at the same time with new batteries of the
same brand and type.
Recycle raw materials & batteries instead of disposing of waste. The unit, accessories, packaging &
used batteries should be sorted for environmentally friendly recycling in accordance with the
latest regulations.
INTENDED USE
The rangefinder is intended for measuring
distances, lengths, heights, clearances and for
calculating areas and volumes. The rangefinder is
suitable for interior and exterior construction
site measuring.
PRODUCT FEATURES
The numbering of the product features shown
refers to the illustration of the rangefinder on the
graphic page.
1 Latch of the extension pin
2 Continuous laser beam
3 Function-mode button
4 Length, area and volume measurement
5 Result button
6 Plus button
7 Measuring and continuous measuring button
8 Reference point button
9 Display
10 View finder of the optical sight (GLR825 only)
11 Display-illumination button
Electrical Safety Procedures
Environment Protection
Functional Description
-7-
operation mode.
ALWAYS repair and servicing must be performed
by a qualified repair facility. Repairs performed by
unqualified personnel could result in serious
injury.
DO NOT use this rangefinder for any purpose
other than those outlined in this manual. This
could result in serious injury.
DO NOT disassemble the rangefinder. There are
no user serviceable parts inside. Disassembling
the laser will void all warranties on the product.
Do not modify the product in any way. Modifying
the rangefinder may result in hazardous laser
radiation exposure.
DO NOT mix battery chemistries.
DISPOSE of batteries per local code.
DO NOT dispose of batteries in fire.
KEEP batteries out of reach of children.
REMOVE batteries if the device will not be used for
several months.
12 Minus button
13 Min. / Max. measurement button
14 Vial level
15 Measured-value list button
16 On/Off/Clear button
17 Hand strap mounting post
18 Extension pin
19 Laser warning label
20 Serial number
21 1/4" thread hole for mounting optional tripod
22 Battery compartment
23 Locking knob of the battery compartment
24 Alignment aid
25 Optical sight window (GLR825 only)
26 Reception lens
27 Laser beam outlet
28 Protective case
29 Hand strap
30 Laser viewing glasses*
31 Laser target plate*
Publicité
Table des Matières
