Philips S5588 Mode D'emploi page 19

Replacing the Quick Clean Pod Cartridge (specific
models only)
Frequency of use
Every day
A few times per week About 20
Every week
Every month
Clean Pod (see 'How do I clean my appliance and
the attachments?').
Always shake excess water off the shaver before
you place it in the Quick Clean Pod.
1 Place the shaver upside down into the Quick
Clean Pod. The shaver automatically detects
that it is in the Quick Clean Pod.
2 Switch on the shaver to start the cleaning
program.
Each cleaning program takes approximately
one minute. During the cleaning program the
cleaning symbol lights up continuously and the
blue icon pulses.
The shaver handle vibrates twice quickly when
the cleaning program is finished.
3 Let the shaver air-dry completely in the Quick
Clean Pod before storing it.
Replace the Quick Clean Pod Cartridge
immediately when the cartridge replacement icon
on the Quick Clean Pod becomes visible or follow
the table below.
Cycles
About 30
About 13
About 3
English
When to replace
the Quick Clean
Pod Cartridge
Every month
Every 2 months
Every 3 months
Every 3 months
21