Philips S5588 Mode D'emploi page 11

Charging in the charging stand (specific models only)
'Unplug for use' symbol
How do I use my appliance and the
attachments?
1 Make sure the appliance is switched off.
2 Put the small plug in the charging stand and put
the supply unit in the wall socket.
3 Place the appliance in the charging stand.
Specific models only: The light ring on the
bottom of the charging stand lights up and
rotates quickly.
- After approximately 5 minutes, the light ring
rotates slower. The battery now contains
enough energy for one shave.
- As the appliance continues to charge, the
light ring becomes brighter and rotates
slower.
- When the appliance is fully charged, the light
ring lights up fully and stops rotating.
4 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
charging stand.
The 'unplug for use' symbol flashes to remind you
to disconnect the appliance from the wall socket
and remove the small plug from the appliance
before you switch it on.
Warning: Always check the appliance and
all accessories before use. Do not use the
appliance or any accessory if it is damaged,
13
English