Warn 93954 Instructions D'installation page 6

9. Attach plow flange plate (A2) to push tube using hardware
provided in push tube kit.
10. Slide plow blade/plate assembly into the plow mount and
secure with pins (A7) and M6 capscrews (A8).
11. With plow assembly mounted to vehicle, route winch rope
from the roller fairlead, around the pulley, and then back to
the vehicle, see Figure 9.
NOTICE: When using a winch to operate plow, make sure the rope crimp does
NOT enter into the plow pulley. Repeated contact between the rope crimp and
plow pulley will result in equipment damage.
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
Plate (A2)
Figure 7
M6 Capscrews
Figure 8
Rope
Crimp
Pulley
Figure 9
Pins
(A7)
(A8)
93953A1