Installation - Warn 93954 Instructions D'installation

NOTE: If using a WARN Winch with your WARN Plow System,
be sure to install your winch before beginning your
front plow mount installation.
1. Remove brush guard by first removing the M8 and M10 bolts
and nuts from each side.
2. Remove bolts from bottom of brush guard.
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
I N S T A L L A T I O N I N S T R U C T I O N S
4
Figure 1
Remove
(each side)
Remove
Figure 2
Remove
Figure 3
93953A1