Warn 86386 Instructions D'installation page 6

6. Install the M10x 95mm long bolts down through
the top of the front plow mount through the
lower tabs and secure with 3/8 flat washers
and M10 nylock nuts. See figure 9a and 9b.
7. Tighten nuts at this time.
8. Install M10 x 40mm bolts with spacers, one
spacer on each side of the frame rails. The
spacer holds the strap away from the frame
to provide adequate clearance. See figure 10
and 11.
WARN® INDUSTRIES PAGE 6
Figure 9a
Figure 9b
Figure 10
86388A0