Panasonic AW-PH400E Mode D'emploi page 56

Roll Unit AW-RL400
Installation
Attach the camera mounting plate to the roll unit in a way contrary to the procedure of removing it in step
.
Camera mounting plate's screws
Using the pan-tilt head connecting cable provided, connect the [OPTION] connector on the pan-tilt head connector panel and
the connector on the roll unit.
OPTION connector
Lens cable
Pan-tilt head connecting cable
 After the roll unit and camera body have been mounted on the pan-tilt head, complete the installation by mounting the lens.
 Connect the lens cable connectors to the camera body and pan-tilt head.
55 (E)