Description Of The Functions Associated With Keys On The Infrared Remote Control; To Switch The Device Off - Schiller FRED easy TRAINER Notice D'emploi

5.3 Description of the functions associated with keys on the infrared remote
control
Key 0 Immediate move to the next step
Restart at the analysis step; reset of the counters of time and number of
Key 1
delivered shocks
Key 2 Shock recommended
Key 3 Shock not recommended
Key 4 The rhythm has changed
Key 5 Press on the electrodes (bad contact)
Key 6
The device is not really off. Press on one of the keys 0 to 5 to continue
Key 7
The device is not really in the standby mode. Press on one of the keys
Key 8 Resume CPR
Pause : the current scenario is interrupted : the display is frozen and the
Key 9
green diode (7) does not flash. Press again on key 9 to continue the
training

5.4 To switch the device off

Press at the same time for a few seconds the orange button (5) and the green button (1),
then slacken them to switch the device completely off. It is then no longer consuming energy.
The device is only completely switched off when the green diode is no longer
flashing. Do not leave it in standby mode, as this empties the battery
Simulation of device off and green diode (7) off
Simulation of device off and green diode (7) is flashing
0 to 5 to continue the training.
CAUTION :
unnecessarily.
27
CAUTION !
the training.
CAUTION !