AEG M405 Guide D'utilisation page 14

14
bottom of the battery down until it
clicks into place (2).
• Replace the back cover by placing it
flat on the back of the handset and
pushing up until it clicks into place.
6.2 Charge the battery
Warning:
Use only supplied/approved batteries
and chargers. Using others may be
dangerous and will invalidate approvals
or warranty. A battery must be fitted. Do
not charge with the back cover removed.
• Connect the charger lead firmly into
the micro-USB socket at side of the
handset, or place the handset directly
in the charging cradle.
• Plug the mains power adapter into
an AC mains socket. If the handset
is turned on, "Charger connected"
displays for a few seconds, and
the battery symbol bars scroll to
1 2