Milwaukee 5318-DE Manuel De L'utilisateur page 2

GENERAL SAFETY WARNINGS
WHEN USING THE CHISEL BOOT,
WARNING
BASIC PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE FOL-
LOWING: READ THIS OPERATOR'S MANUAL, AS
WELL AS YOUR TOOL AND VACUUM OPERA-
TOR'S MANUALS, AND ALL LABELS ON THE
CHISEL BOOT, TOOL, AND VACUUM. FOR
HOUSEHOLD OR COMMERCIAL USE.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not use in the presence of explosive dust,
liquids or vapors.
• Do not use where oxygen or anesthetics are used.
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Use extra care when using on stairs.
ELECTRICAL SAFETY
• Do not pick up wet material. Do not use water to
settle dust.
PERSONAL SAFETY
• STAY ALERT. Watch what you are doing and use
common sense. Do not use dust extractor when you
are tired, distracted or under the influence of drugs,
alcohol or medication causing diminished control.
• The operation of a dust extractor can result in for-
eign objects being blown into eyes, which can result
in eye damage. Always wear safety goggles or glasses
with side shields when operating dust extractor.
• Wear a dust mask or use an OSHA compliant
dust extraction solution when working in dusty
situations. Dust particles can harm your lungs.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the dust
extractor in unexpected situations.
• Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts.
• Use only as described in this manual. Use only
manufacturer's recommended attachments.
USE AND CARE
• Do not use to pick up flammable or combustible
liquids such as gasoline or use in areas where they
may be present.
• Do not pick up anything that is burning or smoking
such as cigarettes, matches, or hot ashes.
• Do not pick up soot, cement, plaster or drywall
dust without filter in place. These are very fine
particles that may affect the performance of the motor
or be exhausted back into the air.
• This product is suitable for collection of silica dust
when used in accordance with these instructions.
To reduce the risk of health hazards from other
vapors or dust, do not vacuum carcinogenic, toxic
or hazardous materials such as asbestos, arsenic,
barium, beryllium, lead, pesticides or other health
endangered materials.
• WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction activi-
ties contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
• Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint, hair,
and anything else that may reduce air flow.
• Maintain dust extractor. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the dust
extractor's operation. If damaged, have the dust
extractor repaired before use. Many accidents are
caused by poorly maintained tools.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
• Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
SPECIFIC SAFETY RULES
•The SDS Max Chisel Boot is compliant with Table
1 of OSHA Standard 29CRF 1926.1153 assuming
(1) it is used in accordance with MILWAUKEE
instructions and (2) it is attached to a dust collec-
tor that has a filter with 99% or greater efficiency
and a filter-cleaning mechanism. Please reference
https://www.osha.gov for further details on compli-
ance methods.
•Before using the chisel boot, read this operator's
manual, your tool and vacuum manuals, and all
labels on the attachment, tool, and vacuum.
• Wear ear protectors. Exposure to noise can cause
hearing loss.
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
READ AND SAVE ALL
INSTRUCTIONS
FOR FUTURE USE
SPECIFICATIONS
Cat. No. .................................................... 5318-DE
Chisel Width .................................................. 1-1/8"
Vacuum Port Outer Diameter ...................... 1-7/16"
Vacuum Port Inner Diameter ......................... 1-1/4"
Adaptor Outer Diameter ................................ 1-3/4"
Adaptor Inner Diameter ................................. 1-1/2"
Type ......................................................... SDS Max
2
SERVICE