Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

What to do if ...??

... the stove doesn't draw properly?
 Is the chimney or the stovepipe not tight?
 Has the chimney been incorrectly designed?
 Is the external temperature too high?
 Are the doors of other fireplaces connected to the
chimney open?
... the room doesn't get hot??
 Is the heating requirement too high?
 Is the waste gas pipe blocked?
 Is the combustion air supply been closed?
 Is the chimney draught too low?
 Is the wood used as fuel not dry?
... the stove gives off too much heat??
 Is the combustion air supply open too wide?
 Is the delivery pressure too high?
... the grate becomes damaged or slags are formed?
 The stove was overloaded.
 The ash pan was not emptied in good time.
... a fault occurs?
 Do not add any more fuel.
 Do not open the combustion chamber door.
 Allow the fire in the chimney to burn itself out in a
controlled fashion.
... the chimney catches
 Minimize the air supply to the stove and call the fire
department.
 Inform the chimney sweep.
 Have a professional determine the cause.
27
fire?

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

23/78523/786

Table des Matières