Olsberg Ipala Smart Compact Instructions page 20

 Remove and swap back panel (E) and side panel
(G) (see Fig.3+4).
Attention: The side panel needs to be rotated by
180°.
 Refit back and side panel firmly at the top and the
bottom of the unit using the fastening screws
(A-D).
 Knock the cover for the stove pipe connection and
the cover for the combustion air line connection out
of the back panel (E) (see Fig.4).
 Swap the top connection duct and the side sealing
cover.
 Swap the bottom combustion air duct and the side
sealing cover
20