Wake Up Timer - Teac TC-X350i Mode D'emploi

The unit can be programmed to turn on at a specified time.
< Adjust the clock before setting the timer (page 13).
1
If the unit is on, press the STANDBY/ON (
turn it off (standby).
2
Press the TIMER button.
"TIMER SET" appears on the display, and then the "hour" value
starts blinking.
< When no button is pressed for 30 seconds, the wake up timer
setting mode will be cancelled.
3
Press the Volume buttons to set the power on time (hour),
and then press the TIMER button.
The "minutes" value starts blinking.
4
Press the Volume buttons to set the power on time
(minute), and then press the TIMER button.
"OFF" starts blinking.

Wake Up Timer

) button to
5
Press the Volume buttons to select "ON" (turn the timer
function on), and then press the TIMER button.
The current time and
< When you do not use the wake up timer, select "OFF".
6
Turn the unit on and prepare the source.
To play a CD, select "CD" using the SOURCE button and set a
disc.
To play an USB memory device, select "USB" using the SOURCE
button and set an USB memory device.
To listen to the FM or AM, select "FM RADIO" or "AM RADIO"
using the SOURCE button and tune in to a station.
7
Press the STANDBY/ON button to turn the unit off
(standby).
The unit will turn on at the specified time every day.
Do not forget to turn the unit off (standby), or the wake
up timer will not work.
When the wake up timer reaches the power on time, the unit
is set to "SLEEP 60" automatically and the unit will be turned off
(standby) 60 minutes later.
If you want to listen continuously, press the SLEEP button
repeatedly to select "SLEEP OFF" after reaches the power on
time.
< When the wake up timer reaches the power on time, the unit
turns on with the source that was last selected.
< To turn off the wake up timer, select "OFF" in step
disappears from the display.
appears on the display.
.
5
27