Description Of The Handheld Set; Description Of The Display - Ravelli Touch Radio Manuel D'utilisation Et D'entretien

Rev.0 17/05/2021
EN
Pag.22

Description of the handheld set

The PDA looks like the following picture:
The information below will familiarize you with the product and give you the best performance.
1
2
3
��
In "Sleep" mode, the handheld computer screen is darkened, but radio communication with the stove is still active in order
to reduce battery consumption.
How to insert the batteries in the handheld set:
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries (mini
pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover as shown
in figure B
What happens if the batteries are empty
If the battery is discharged, within the "drop" is shown a symbol that indicates that the battery is empty, while maintaining active the
features of your device.
As soon as the level of the battery prevents the radio communication the handheld set displays on full screen the picture of empty
battery and all device functions are locked until the batteries are replaced.
��
If not in use for a long time, we recommend removing the batteries from the remote control.

Description of the display

The display of the handheld set is described below (in "Home" mode):
Use and maintenance manual Phandheld Touch Radio
4
5
6
Figura A
1
Increase button "UP" (selection key)
2
Decrease key "DOWN" (selection key)
3
ON/OFF or reset from "Sleep" mode key.
4
Display
5 Key for accessing the MENU and back
6
Confirmation key
Figura B
1
2
3