Protecting The Environment - Black & Decker Powerful Solutions GT5026 Mode D'emploi

ENGLISH
Regularly clean the motor housing using a clean damp

cloth. Do not use any abrasive or solvent-based
cleaner.
Make sure all switches are free of debris before

and after use.
Removing the guard (fig. B)
Warning! Remove the guard for servicing purpose only.
Always re-fit the guard after servicing.
Remove the screws (8).

Slide the guard (6) off the tool.

Troubleshooting
If the tool does not operate correctly, check the following:
Fault Possible
cause
Tool will not start Blown fuse
Tripped RCD
Mains lead
disconnected
Technical data
Voltage
Power input
Blade strokes (no load)
Blade length
Blade gap
Blade brake time
Weight (without supply cord)
8
Action
Replace fuse
Check RCD
Check mains supply
GT5026 GT6025
TYPE 1 TYPE 1
Vac 230 230
W 600 600
min-1 1400 1400
cm 50 60
mm 26 26
s <1.0 <1.0
kg 4.5 4.75
Vibration total values (triax vector sum) according to
EN 60745:
Vibration emission value (a
uncertainty (K) 1.5 m/s

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage
of this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list
of authorised Black & Decker repair agents and full details
of our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
GT6026 GT6030 GT6530
TYPE 1 TYPE 1 TYPE 1
230 230 230
650 650 650
1400 1400 1400
60 60 65
26 30 30
<1.0 <1.0 <1.0
4.75 4.75 4.8
2
) 4.6 m/s ,
h
2
GT7026 GT7030
TYPE 1 TYPE 1
230 230
700 700
1400 1400
70 70
26 30
<1.0 <1.0
4.9 4.9