Philips sonicare ExpertClean 7300 Mode D'emploi page 21

1 Connect the charging travel case to 5V DC input power
either from:
- The USB adapter provided
- a UL-listed or certified to ANSI/UL 60950-1 personal
- a UL-listed or certified to ANSI/UL 60950-1 LPS power
- a UL-listed or certified 1310 Class 2 power supply.
Important: The wall adapter must be a safe extra low
voltage source, compatible with the electrical ratings
marked on the bottom of the device.
2 The travel case will charge your toothbrush until your
toothbrush is fully charged.
Note: Charging the handle with the charging travel case may
take longer than on the charger.
Battery Status (handle on plugged in charger)
When the handle is placed on the charger, sanitizer or travel
case , the battery light will flash green based on the current
battery level.
Number of Flashing LEDs
1
2
3
Note: When the handle is fully charged, the three battery
indicator lights light up green. After 30 seconds the battery
indicator lights switch off.
35_021_7418_2_Booklet_A6_v2.indd 21
computer's standard USB connector or,
supply with USB output port or,
Battery charging status
Low
Medium
High
English 21
16/05/2019 10:07