Klarstein BORNHOLM SINGLE Mode D'emploi page 20

EN
To activate the touch-sensitive display keys: During operation, the display
keys usually turn off. Touch the area beneath the temperature display in order to
activate the display keys.
ECO-mode (energy saving mode): Press and hold the "Settings" (16) and Down
arrow (14) for three seconds (or press the ECO button on the remote so the
appliance can be set to energy saving mode. In energy saving mode, the display
will only show certain features (depending on how you have set the device before
putting it into energy saving mode).
Sleep mode: If no buttons are pressed for 10 seconds when the appliance begins
to heat, the display will enter sleep mode and only display the surrounding
temperature.
Open window detector: If the surrounding temperature drops by 3°C within
a 2 minute period, the system will activate the open window detector. The
corresponding symbol will appear on the display and it will make a noise. The
heating will turn off.
Day/week timer: Press the „W/24H" button to switch between the settings for
the day and week timer. The display will then show "DayTimer" and "week timer",
respectively.
Day timer: This setting will display as "DayTimer". Press "Weektimer" on the
remote to set the amount of hours. Choose one hour using the arrow buttons (13,
14). Using the "Settings" button (16) you can change the minutes. You can use the
arrow buttons to set the minutes. Confirm your setting with the OK button and
then save your settings.
Week timer: The week time permits 4 operating cycles in one day and seven days
in a week. "Weektimer" will appear on the display. Press the "Settings" button (16)
on the remote in order to view any day ((6) will blink). Using the arrow buttons (13,
14), select the first operating cycle. Using the "Settings" button (16) you can then
choose a start time that you can select using the arrow buttons. Use the "Settings"
button (16) again to set a switch-off time. Proceed the same way to set.
To cancel a programme: To remove all previous settings (Daytimer or weektimer),
press and hold (16) for 10 seconds.
Background lighting: Press the OK button on the remote when heating. The
background will light up in different colours. Every time you press the button the
colours will change. There are 6 colours in total. Once you have made it through
to the last colour, you can press the OK button again to turn off the background
lighting.
To turn off: Press the on/off button to turn off the appliance. The appliance will
then cease to operate. The appliance will switch off.
20