Abus eyseo. TV7206 Guide D'installation page 89

RTSP streaming:
"RTSP-Authentication" Enable the authentication of RTSP. On connection to an RTSP client
username and password will be checked.
Note: This function must be supported by the media player (e.g. Realplayer 10.5)
"Access name for stream 1" The access name for establishing a connection from a client. The
codec type must be MPEG 4! Use rtsp://<IP address>:RTSP-port/<access name 1> to establish a
connection.
"Access name for stream 2" The access name for establishing a connection from a client. The
codec type must be MPEG 4! Use rtsp://<IP address>:RTSP-port/<access name 2> to establish a
connection.
"RTSP port" This port can differ from the default Port 554 (554, or 1025 to 65535). If you change it,
note that the input format is analogue to the HTTP port.
"RTP Port for video" This can be other than the default port 5558. It must be an even number.
"RTCP port for video" This port must be RTP port for video plus 1.
"RTP port for audio" This can be other than the default port 5556. It must be an even number.
"RTCP port for audio" This port must be RTP port for audio plus 1.
Multicast: The settings can be configured for stream one and two.
"Always multicast" This option turns on the multicast, bandwidth-conserving technology.
"Multicast group address" It specifies an arbitrary group of IP hosts that have joined the group and
want to receive traffic sent to this group.
"Multicast video port" This can be other than the default port 5560. It must be an even number.
"Multicast RTCP video port" This port must be multicast video port plus 1.
"Multicast audio port" This can be other than the default port 5562. It must be an even number.
"Multicast RTCP audio port" This port must be multicast audio port plus 1.
"Multicast TTL" Time to Live
Pay attention to the port forwardings in your Router. All ports like http, rtsp must be forwarded.
22