Abus eyseo. TV7206 Guide D'installation page 64

start <ip address>
end <ip address>
index <value>
return <return page>
RTSP SDP
Note: This request requires viewer access privilege
Method: GET/POST
Syntax:
http://<servername>/viewer/<0~(n-1)>/<network_accessname_<0~(m-1)>>
rtsp://<servername>/<0~(n-1)>/<network_accessname_<0~(m-1)>>
"n" is the channel number and "m" is the stream number.
You can get the SDP by HTTP or just describe by RTSP protocol directly. For detailed streaming
protocol, please refer to "control signaling" and "data format" documents.
The start IP address to add or to delete.
The end IP address to add or to delete.
The start position to add or to delete.
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or
relative path according the the current path. If you omit this
parameter, it will redirect to an empty page.
64