The Pan/Tilt Control Buttons - Abus eyseo. TV7206 Guide D'installation

The pan/tilt control buttons

These buttons are available only if a PTZ camera was connected and configured inside the
videoserver.
The direction buttons are for Left, Right, Up, Down and Home functions. The Home function moves the
camera head to a defined "Home" position (if supported).
Another way to change the viewing angle of the camera is by using the mouse pointer and click
directly on a position on the video picture.
"Zoom" Setup of the zoom factor of the connected and configured PTZ camera.
"Focus" Manual setup of the camera focus
"Pan Speed" The selection sets the moving speed of the "Left" and "Right" commands.
"Tilt speed" The selection sets the moving speed of the "Up" and "Down" commands.
"Zoom speed" Defines the zoom range of the "+" and "-" commands.
"Go to" Once the Administrator has determined the preset positions, the user can aim the videoserver
using this control.
13