Hot Water - Breville Duo-Temp Pro BES810 Série Manuel D'instructions

OPERATING YOUR BREVILLE PRODUCT
TEXTURING MILK
The Duo Temp™ Pro is equipped with
a commercial style steam wand.
•
Before inserting the steam wand into
the milk, it is recommended to purge
the steam wand.
•
Set the Control Dial to 'Steam'.
•
The 'Steam' LED will illuminate.
•
It may take a few moments before the
steam appears.
•
Pause the steam by returning the dial
back to the 'Standby' position. This will
avoid the milk splashing out of the jug.
•
The Steam will Pause for 8 secs.
•
Insert the wand into the milk and set the
Control Dial to the 'Steam' position to
texture milk.
•
To stop the steam set the Control Dial
to the 'Standby' position and remove
the jug.
NOTE
When the espresso machine creates
steam, a pumping noise can be heard.
This is the normal operation of the
15 bar Italian pump.
16
BES810BSS_USC_IB_C14.indd 16

HOT WATER

The machine features a separate Hot
Water function that dispenses hot water
from the steam wand.
To use the Hot Water function:
•
Press the SELECT button and the
Hot Water LED will illuminate.
•
Direct the spout outlet towards the
drip tray.
•
Turn the Control Dial to 'Steam'.
•
To turn the hot water off, turn the
Control Dial to the 'Standby' position.
NOTE
The machine will automatically default
to 'Steam' when the appliance is first
switched on.
Steam and Hot Water functions cannot
be operated at the same time.
WARNING
Hot water may drip from the Steam
Wand. Always direct spout outlet
towards the drip tray.
AUTO PURGE
For extracting espresso immediately after
using the steam function, this machine
features an auto purge function.
The auto purge function ensures the
ground coffee will not be burnt by the
initial water flow from the thermocoil being
too hot. Water is automatically released
internally into the drip tray ensuring that
the thermocoil is at optimal temperature
for extracting espresso. Your espresso
will always be extracted at the optimal
temperature ensuring only the best flavors
are extracted.
3/07/2014 10:03 am