Seca 954 Mode D'emploi page 76

76 •
3. Select the item "rF" in the menu.
4. Confirm the selection.
5. Select the menu item "lrn" (learn) in the "rf"
submenu.
6. Confirm the selection.
The wireless group currently selected (here:
wireless group 0 "ID 0") is displayed.
If the wireless group "0" already exists, use the
arrow keys to select another ID (here: wireless
group 1 "ID 1").
7. Confirm your selection for the wireless group.
The device will suggest a channel number for chan-
nel 1 (here C1 "0").
You can either accept the channel number sug-
gested or select another channel number using the
arrow keys.
8. Confirm your selection for channel 1.
The device will suggest a channel number for
channel 2 (here C2 "30").
You can either accept the channel number sug-
gested or select another channel number using the
arrow keys.
NOTE:
Two-digit channel numbers are displayed with-
out a space. The display "C230" means: chan-
nel "2", channel number "30".
9. Confirm your selection for channel 2.
The device will suggest a channel number for
channel 3 (here C3 "60").
You can either accept the channel number sug-
gested or select another channel number using the
arrow keys.
10. Confirm your selection for channel 3.
StOp
The message
The device is waiting for signals from other equip-
ment devices with radio transmission capability
within its range.
appears in the display.