Control Panel Buttons; Display Information; Getting Started - OPED VADOplex Professional 1.0 Mode D'emploi

www.oped.de | www.oped.ch
Device initialization
5. When is the device ready for operation?
This screen indicates that the self-check is complete and the device
is ready for operation.
6. Press the Start/Stop button
Control panel

Control panel buttons

Start/Stop Individual pressure
button adjustment

Display information

Pressure setting OK: displayed as soon
Left side as set pressure is
reached
Application time in
seconds, left side

Getting started

1. Plug the two connecting tubes into the corresponding sockets at
the rear side of the device, one on the left and one on the right.
2. Plug the supply cable into a power socket.
3. Attach the VADOplex pads and make sure that they are positioned
properly (see user manual supplied with pressure sleeves). The
pads are to be used for one patient only and may neither be used
for several patients nor refurbished.
Mode button
Pressure setting
Right side
Application time in
seconds, right side
Display between
pressure pulses
Display during
pressure pulse
33