OPED VADOplex Professional 1.0 Mode D'emploi page 16

www.oped.de | www.oped.ch
Description
Right tube
Device description
connector
Front side
Connecting
tubes to pads
Display
Control panel
Power switch on/off
Caution: The right patient side corresponds to the left channel
when looking at the device front side.
Rear side
Two tube connections
for the pads
Transport handle
and bed mounting
Ventilation slots
Information on
error messages 1-4
Supply cable connection
Left tube
connector
Left tube Right tube
connector connector
Device initialization
1. Plug the power plug into the power socket
2. Plug the respective connectors into the outlets
Plug the tube for the left pad into the left connection. Plug the tube
for the right pad into the right connection.
3. Attach the pads properly. Connect controller tube
to pad tube.
Attach the VADOplex pads and make sure that they are positioned
properly (see user manual supplied with pressure sleeves). The
pads are to be used for one patient only and may neither be used
for several patients nor refurbished. Plug the metal pin of the
connector tube to the pad tube.
4. Switch on the power switch
31