XTERRA Fitness ERG200 Guide D'utilisation page 9

2 ATTACHING PEDALS
55
17
13
12
15
1. Attach the left pedal (14L) to the left bracket of pedal
support tube (17). Secure using one axle for pedal (15),
two sets of allen bolt (12) and washer (13).
2. Repeat the same procedure for right pedal.
3. Attach the pedal support tube (17) to the bottom of main
frame (1). Secure using two sets of carriage bolt (19),
washer (25) and domed nut (34).
4. Pull out the lock pin (55) from pivot on u type connect tube
(58). Flip down the bracket and insert the lock pin (55)
back to the pivot to lock the bracket in horizontal position.
customerservice@dyaco.ca
1
12
34
13
25
13
12
15
19
14R
14L
Hardware Step 2
2 Carriage Bolt (#19)
Left Pedal (#14L)
Right Pedals (#14R)
2 Axle for Pedal (15)
2 Allen Bolt (#12)
2 Washers (13)
2 Washers (25)
2 Domed nuts (34)
9
Dyaco Canada Inc 2017