Erg200 Assembly Instructions - XTERRA Fitness ERG200 Guide D'utilisation

ERG200 ASSEMBLY INSTRUCTIONS
1 STABILIZERS, CONSOLE MAST & CONSOLE
6
7
2
3
1. Attach the front stabilizer (3) to the main frame (1). Secure using
two allen bolts (2), two curve washers (6) and two spring washers
(7).
2. Connect the computer sensor wire (21) to the back of the
computer (9).
3. Attach the computer (9) to the computer bracket (62) and fasten
with two screws (10).
NOTE: Ensure that the wires are not pinched behind the computer.
Please insert two ''AA" batteries (not included) at the back of the console.
customerservice@dyaco.ca
9
21
10
62
1
8
Hardware Step 1
2 Allen Bolts (#2)
2 Spring Washers
(#7)
2 Curved Washers
(#6)
Dyaco Canada Inc 2017