HEADRUSH Pedalboard Guide D'utilisation Rapide page 11

Hardware Assign
The Hardware Assign screen enables you to customize
how HeadRush Pedalboard's footswitches, expression
pedal, and parameter knobs control each rig.
To open the Hardware Assign screen, tap the 
button in the upper-right corner of the main screen,
and then tap Hardware Assign.
To return to the main screen, tap the  button in the
upper-left corner.
Important: The Hardware Assign settings are all part of
the overall rig, so remember to save your changes you
want to keep.
To set the color associated with the rig, tap it in the upper-left part of the screen. This color will appear next to
the rig name when you view a list of all available rigs or when you view and create setlists. It will also be the color
of the corresponding footswitch indicator when HeadRush Pedalboard is in Rig View.
To set the tempo of the rig's time-based effects (delays, modulation, etc.), tap the button under Tempo to
select Current or Fixed.
•
Current: The rig will use the last-used tempo or the one set by the Tempo footswitch.
To set the tempo, press the Tempo footswitch (the lower-right-most one) at the desired tempo 3–8 times to
set the new tempo in beats per minute (BPM). You can do this anytime that footswitch display shows Tempo.
•
Fixed: The rig will use a tempo that you set here.
To set the tempo, turn the encoder to set the desired tempo in beats per minute (BPM). You can set the
tempo only in this Hardware Assign screen.
Footswitches
The eight boxes in the lower-left corner represent the middle eight footswitches of HeadRush Pedalboard. You
can assign any switch-based parameters (ones with only two states) to any of the footswitches—regardless of
their location in the signal chain.
To assign a parameter to a footswitch:
1. Tap a box.  indicates an empty box.
2. In the list that appears, tap the model with the parameter you
want to assign.
3. In the list that appears, tap the parameter you want to assign.
Usually, the parameter will simply be On (to activate or
deactivate it).
Tap Unassigned  to unassign that footswitch.
To swap two assignments, tap and drag one of them over the
other, and then release it.
11