Black & Decker CM2046 Serie Guide D'utilisation Et D'entretien page 8

4. Use HR and MIN buttons to set BREW LATER time (while BREW LATER display
is blinking)
5. After 3 seconds with no button pressed, BREW LATER time is set.
6. When the BREW LATER function is set, BREW LATER is displayed (not
flashing), and unit will begin brewing at the BREW LATER time.
If BREW LATER function has been previously set:
The programmable Brew Later delay start allows you to set the 24-hour timer
to brew coffee at the selected time, day or night. To activate the Auto Brew
timer, follow these steps
1. Press BREW LATER button to check the BREW LATER time. "BREW LATER"
will flash once per second, and the clock will display the BREW LATER time for
3 seconds
2. After 3 seconds, clock reverts to current time, and "BREW LATER" is
illuminated (no flashing)
Note: To override the BREW LATER function, press the Power button
cancel. Unit begins brewing immediately
Note: Even though BREW LATER is disabled, the BREW LATER time will still
be stored unless unit is unplugged
8
:
to