Timer Function; Changing The Filter - Beurer LR 220 Mode D'emploi

Z
Z
Z

7.3 Timer function

The air purifier features a timer function that you can use to determine the number of hours the air purifier
ON/OFF
should run for before it automatically switches itself off. The air purifier has three timer periods: 2h (two hours),
4h (four hours) and 8h (eight hours). The automatic switch-off takes place after the set time has elapsed in
all fan speed settings.
• To switch between the individual timer periods, press the TIMER button
display, the currently set TIMER time lights up ( 2h, 4h or 8h). The air purifier will now automatically switch
off after the set number of hours has passed.
XXX.XX_LR220_2020-02-20_01_printing_BEU
• To switch off the timer, repeatedly press the TIMER button
out. The air purifier now cleans continuously.

7.4 Changing the filter

The three-layered filter should be replaced with a new one after 4260 operating hours. After 4260 operating
hours have elapsed, the FILTER indicator will light up red on the display. To change the filter, proceed as
follows:
Z
Z
Z
1. Press the ON/OFF button to switch off the air
purifier. Disconnect the air purifier from the
socket.
XXX.XX_LR220_2020-02-20_01_printing_BEU
3. The filter and housing base can now be removed
downwards.
2H 4H 8H
FILTER
4H
2H
ON/OFF FILTER
Z
Z
Z
Z
2H 4H 8H
Z
Z
ON/OFF FILTER
XXX.XX_LR220_2020-02-20_01_printing_BEU
XXX.XX_LR220_2020-02-20_01_printing_BEU
8H
2. Unscrew the large twist lock on the underside.
4. Insert a new filter.
21
4H
2H 8H
. In the TIMER display of the
ON/OFF FILTER
until the light above the TIMER display goes